Fram PH3773 Extra Guard® Spin On Oil Filter, Full Flow

Engineered for Conventional Motor Oil. Cellulose and Glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2.

• PH3773
• Full flow, spin on lube oil filter
• Heavy duty
• Designed with components that meet demands for regular oil change intervals according to oem recommendations
• Cellulose media for efficiency & capacity for particle removal
• CJ4 oil compatible
• Gasket materials that stand up to diesel engine environments
• Statistical process control insures quality manufacturing

Technology:

• With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, FRAM Extra Guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protection
• Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles

Installation Instructions:

• Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hot
• Place a drain pan under the oil filter and unscrew oil filter
• Clean mounting base making sure the "O" ring from the old filter is not stuck to the filter mount
• Apply film of clean oil to filter gasket. Do not use grease
• Screw new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markers
• Check owner's manual for correct oil specification, viscosity and amount
• Add oil to "full" on dipstick. Idle engine for five minutes and check for leaks
• Shut off engine and recheck oil level after 5 minutes and top off as necessary.